As well as the usual mass exodus to the gym and setting fire to all the take-a-way menus, the new year often kickstarts a renewed interest in DIY as we look to hit the ground running and spruce up our homes.
On average, it can cost as much as £3,208 to right a DIY wrong which can make a serious dent in your savings, particularly while your account remains on life support following the festive blowout.
Believe it or not, some of the most common DIY mistakes are considered the easiest job with wallpapering, putting up shelves, painting, fixing a toilet flush and unblocking a drain often those that go wrong the most regularly.
Here’s what not to do in order to DIY like a pro.
Use a spirit level
It’s the most simple and obvious tip, but the majority of us neglect the spirit level when putting up shelves. What should be a five-minute job then takes a lot longer with wonky shelves leading to multiple holes drilled which requires further filling and wallpapering or painting to rectify.
A £10 spirit level will ensure you get the job done the first time around saving you money on the other materials needed to put right a bodged shelf.
Keep it simple and neutral
Wallpaper and paint are a cost-effective way to transform a room but keep it simple and neutral. We often underestimate the amount of paint needed and super expensive paint can cost you a bomb if you have to go back for a second or third time. Likewise, fancy wallpaper may seem nice, but if you have to constantly cut to match fancy patterns, you will need more rolls and will create more waste. Stick to neutral patterns and colours to save on money and time.
Avoid the quick fix
It’s rarely that much quicker and often requires you doing half the proper job without finishing it anyway. For example, the winter can often bring wet weather and cause your door to stick due to a swollen frame. A quick plane of the wood will sort that out but all too often we leave the job there and reattach the door.
While it’s off the hinges, be sure to paint the exposed edges with oil-based primer as if the wood isn’t sealed it can absorb more water and your back to square one, or worse, in need of a new door altogether.
Spend money to save money
It might not seem the best way to save money but don’t be the workman that blames his bad tools. Buy better and the job will be better and last longer. For example, don’t buy the most expensive paintbrushes on the market, but don’t buy cheap, they have fewer bristles which give an untidy finish and often requires more coats of paint which brings a greater cost.
You’ll also spend your life picking bristles off of your paintwork where they have come detaches more easily from a cheap brush.
A bespoke job might look the business once finished but if you’re playing around with walls or floors work out where your pipes and wires are, you’ll inevitably need to access these in the future and having to tear apart the new wall or floor is far from cost-effective.
Prepare your work area
We’ve all done it. We won’t drip paint anywhere. It’s not worth the 10 mins to put a sheet down or use masking tape to protect the skirting board. WRONG. Paint has a mind and body of its own and will jump off the brush regardless of how careful you are.
Take the time to prepare your area and protect anything that doesn’t need to be painted otherwise, a cost-effective quick lick of paint can turn into a much longer task, or require new carpets, sideboards and more.
Know your walls
Ideally, you want to drill into weight-bearing stud work behind your plaster to ensure any shelves or other additions are well supported to avoid any injuries later down the line. This will also save on the material costs of putting them back up when they do collapse.
At the same time, know where your pipes and wires are to avoid any serious injury or damage to you and your home. A burst water pipe is very expensive compared to the cost of a shelf.
Finally, if you do it a stubborn support stop drilling. Drill pieces aren’t cheap, and you won’t win.
Measure twice, cut once
It’s age-old advice for a reason. It doesn’t matter whether it’s wood, wallpaper, carpet or any other material. Rushing in with the scissors or saw can require you to cut again, wasting the original piece of material and your money along with it.
Primers are your friend
Many of us feel out of our comfort zone when going above and beyond your basic tin of paint. However, stains happen and when they do it can take tins and tins of water-based emulsion to cover and even then it will still show through. Don’t waste your time, paint and money, get yourself an oil-based prime or spray, apply to the stain to seal it and then cover it with your paint of choice first time around.
To speak to one of our team here at Belvoir Liverpool Central please call 0151 231 1613 or email email@example.com